The 4 Best Air Nibbler of 2020 – Top Models Tested & Reviewed

About Air Nibblers

A nibbler resembles a hand held saw, except that it is mainly used to cut through metal sheets. However, it doesn’t have a blade like a jigsaw. Instead, it has a punch that moves in an upward and downward motion.

Air nibblers use the power of the air to run the engine. This will give the tool enough power to cut through the toughest metals easily.

Quick Answer – Air Nibbler

• Neiko 30067A Pull Type Pneumatic Nibbler
• Ingersoll Rand EC300 Air Nibbler
• 16 Gauge Air Nibbler
• Air Nibbler Sheet Metal Cutter Cutting Metal Steel Puch Metal Shears Cut TE823

---

Review of Best Air Nibblers on the Market:

---

A nibbler is rather unknown to a lot of people, although it is a staple in the construction world. So if you haven’t done a lot of metal work by yourself, you will be surprised at the number of things a good nibbler will allow you to pull off.

In this section, you will find everything you need to know about some of the best products on the market. Go through the products specifications to find something that will work for your specific needs.

---

Neiko 30067A Pull Type Pneumatic Nibbler | 1/4″ NPT Air Inlet | 4 CFM, 90 PSI | 3500 RPM

---

This is the perfect tool to cut through different materials without affecting or deforming the edges. It works with different types of metals in addition to rubber and plastic. It is a must-have in every DIY enthusiast’s gear because it will cut curves with a minimum radius of ½ an inch. It is designed to give precise results with an even finish.

This is rather lightweight because it is made of aluminum. This means that you will be able to carry it for long hours without feeling tired or strained. They high-quality engine housing will keep your nibbler working for long.

The front air exhaust will keep your face safe and DIY projects more fun. You can easily attach it to an air compressor for safe use even if you don’t have much experience with tools. This is a great air nibbler that suits DIY enthusiasts and professionals alike.

Features at a glance:

• Lightweight handheld nibbler to cut through different materials.
• Strong output every time.
• Cuts curves at a small radius.
• Works for ferrous and non-ferrous metal sheets in addition to plastic and rubber.

---

Ingersoll Rand EC300 Air Nibbler

---

This is reliable heavy-duty nibbler that will allow you to cut almost 6 feet of metal sheets per minute. As a bonus, you will finish all your cutting with zero waste and distortion. It is designed to handle tougher projects, going through up to 18 gauge metal sheets with no problem. It works perfectly with aluminum steel, plastic, and rubber.

This is a rather strong nibbler that goes at 4200 strokes per minute. Nevertheless, it can cut at tight curves with a radius of ¼ inches. Thanks to the angled head, no metal sheet will be too difficult to cut through.

It rotates to enable you to work around curves. It also features an ergonomic grip that will allow you to hold it properly for precise results. It is great value for the money, but it will not break or malfunction if you decide to use it every day. In fact, it will work like a knife through butter when it comes to thick steel sheets.

Features at a glance:

• The Strong output that will cut through thick metal sheets.
• Works fast to finish 6 feet of metal sheets per minute with no problem whatsoever.
• Cuts perfectly through curves thanks to the angled head.
• Ergonomic handle and lightweight design that will allow you to control it perfectly.

---

16 Gauge Air Nibbler

---

Having a high-quality product doesn’t mean to go bankrupt. This is a wonderful air nibbler that will do what it promises without costing a fortune. It works best for medium range metal sheets. It can cut through 16 gauge aluminum and 14 gauge steel sheets. It will give precise and accurate results every time you decide to use it.

The best thing about this air nibbler is that it comes with a paddle throttle lever. This will allow for precise control and help you finish your all your cutting projects perfectly. This nibbler is designed to make tight cuts that can go as little as ¼ inches of the radius.

Because it is made of aluminum, it is lightweight and easy to carry. However, the strong engine housing will keep it in one piece so that you can use it for long.   

Features at a glance:

• A convenient handheld aluminum air nibbler.
• Enough power to finish your cutting projects fast.
• Cuts through 16 gauge aluminum and 14 gauge steel.
• Precise cutting at tight curves.
• Lightweight design at an affordable price.

---

Air Nibbler Sheet Metal Cutter Cutting Metal Steel Puch Metal Shears Cut TE823

---

This air nibbler is designed for tough chores. It can cut through tin, aluminum, carbon steel and stainless steel with no problem. Moreover, you will be able to get precise and excellent results every single time.

It is made of aluminum that is both lightweight and sturdy. Aluminum doesn’t transfer the heat and makes this nibbler very easy to carry and control. The motor is designed for precise and smooth operation and can go up to 3000 strokes per minute.

It comes with a precise throttle control that will allow you to adjust the output to suit the type of metal you are cutting. This nibbler works perfectly with thicker metal sheets. It can cut through 18 gauge steel and 16 gauge aluminum with no problem. It works to cut through ½ inches of the tight radius.

Features at a glance:

• The heavy-duty motor that can cut through different types of materials easily.
• The smooth operation to cut through thicker metal sheets.
• Aluminum housing to reduce fatigue and muscle strain.
• Precision cutting with a lever to pick the right speed.

---

Buying Guide For Best Air Nibbler

---

If you are not an expert, you might find that selecting a nibbler is rather difficult. But actually, there are a few factors that could help you with the process.

Strokes per minute:

This is probably the first thing that you would look for. Most of the time you will find nibblers that could go from 1000 to 4000 strokes per minute. This will be enough to go through different types of metals. Slower air nibblers will cut through thicker metals. You need to make sure that your engine is strong enough to support the number of strokes you are aiming for.

Cutting Capacity:

This represents your nibbler’s ability to cut through different metals with different thicknesses. 8 and ten gauges are rather thick while 18 and 20 gauges are thin. However, you will have to understand that it is not only about the metal thickness. For example, your nibbler might be able to cut through rather thick aluminum but can only cut through thin steel.

Cutting Radius:

This is an issue especially if you are usually working around tight corners. In that case, you will have to pay attention to the inside and outside radius. This way, you will be able to pick something that will perfectly suit your cutting needs. A Smaller radius will allow you to follow curves with no problem. If your work is all about cutting through straight lines, then this might not be a big problem after all.

Price Range:

Cheap models might be budget friendly, but will they hold up? It is all about how long and how hard you plan on using your nibbler. For example, if you are still experimenting with DIY projects and want to buy a tool for a school project, then you might get away with buying a cheap model that doesn’t cost much. However, you should make sure that it is sturdy enough to finish your project perfectly.

On the other hand, if you are looking for something durable that will handle use and abuse, then you must be ready to spend that extra cash. Be clear about your expectations before you start browsing for the Best Air Nibbler. This will help you pick the right one.

• Best Sewing Machine 2020
• Best Vinyl Cutters
• Best Wire Stripping Machine
• Best UV Flashlight
• Best Spud Wrench