This is an easy garden project that can lend your yard with charm and the soothing sound of water. A strawberry pot foundation is a wonderful way to liven up an otherwise drab patio garden area. Many long-time gardeners swear by the idea that a garden is simply not complete with some kind of water fixture to imbue your garden with a sense of peace and serenity.
A strawberry pot fountain, besides providing your garden patio with the soothing sounds of trickling water, also doubles as a lovely birdbath.
Why a Strawberry Pot Fountain?
If you are trying to choose a weekend garden project, why should you opt for a strawberry pot fountain? Why not simply head out to your local nursery and purchase a readymade fountain?
There is an undeniable sense of accomplishment in creating your very own water garden fountain. One of the reasons that the strawberry pot fountain has become so popular is that it adds life and motion to an otherwise dull garden.
The steady trickling sound of water has been described as soothing and very melodious. With a quiet trickle, you don’t have to worry about splashing or damage to a wooden deck, as you would with more powerful fountains.
The Basic Design of the Strawberry Pot Fountain Garden
The basic design of the strawberry pot fountain garden is simple enough. Use a low terra-cotta bowl to form the base of the fountain. This base will be catching the falling water of the fountain. Use a terra cotta azalea pot that is wider than it is taller.
You will invert the terra cotta azalea at the bottom of the bowl, and this will support the strawberry pot. This section will also hide the re-circulating pump. The water is pumped through clear tubing that is contained inside of the strawberry pump.
Water will flow through the clear tubing and then pumped through the clear tubing inside of the strawberry pot. The water will gurgle out the top and into a saucer, which will then trickle down lightly over the rim of the saucer and into the low bowl.
The Practicalities of Building a Strawberry Fountain Pot
Here are some of the practicalities of building your very own strawberry fountain pot. This time estimate for completing this project is about four hours, but you will also need to let the fountain pot dry for at least two days.
The cost of making a strawberry fountain pot is roughly $225. As for tools, you should have handy a paintbrush, a bucket, a sharp pair of shears, a round file and various-sized masonry and drill bits.
The basic parts of a strawberry pot fountain are a tapered terra cotta bowl that is about 24 inches wide and 8 inches deep, a terra cotta strawberry pot that is 14 inches wide and about 13 inches in height, a terra cotta azalea pot that is 10 inches wide and 7 inches deep, a terra cotta saucer that is 9 inches wide so that it can sit comfortably on top of your strawberry pot, a plastic saucer, a pump with a flow that is adjustable to two feet, a bag of river rock, clear vinyl tubing, a brass pipe thread adapter, a female brass bell reducer, a brass close nipple, terra cotta vinyl sealer, a waterproof adhesive, silicone sealer and roughly six one-gallon water plants.
Basic Steps for Putting Together Your Strawberry Pot Fountain
Begin by sealing the terra cotta pots, allowing them to dry for at least 24 hours. Drill holes and file down the silt, and then install the brass fittings. Install the saucers and apply some waterproof adhesive to the bottom edge of the plastic saucer.
Once you have put together the brass fittings, it is time to assemble all the pieces of your fountain, add the plants and the water.